Shelving - Warehouse Technology Inc., Philadelphia, PA

	Shelving - Quick link to purchase shelving in our online store.

Warehouse Technology offers the industry’s largest selection of shelving to match all your storage needs. Thanks to our expertise and application knowledge, we can bring this large selection at great prices.

	Products Offered:

	"HOL-DEX" INSERTABLE LABEL HOLDERS Durable plastic won¹t crack, chip or peel. Self-adhesive or magnetic, adheres to most clean surfaces. Non-glare finish is bar code compatible. Can be trimmed to exact size on location. Inserts included. Available in Clear, Red, Green, Blue or Lemon

	60% OPEN SNAP SHELF Constructed of high strength galvanized steel. Each level is equipped with 2 end channels pre-cut to the width of the rack with 2-1/2" cross channels provided every 4". Easy assembly. End channels are fastened to the beams with Tek screws (purchase separately) and the cross channels are attached to the end channels by snap-together mechanism. Painted units and other capacities are available

	AKROBIN® SHELF RACK & BINS Improve workspace efficency and organization with this stationary AkroBin® system. Made from heavy gauge steel, this durable bolt-together rack features 12 - 17"W. x 7.5"H. compartments, configured to hold 12 - H30240 & 6 - H30250 bins (sold separately). Powder-coated Gray finish.

	AMCO II HEAVY-DUTY WIRE SHELVING Super-strength, thanks to hefty I-beam solid steel frame supporting a heavy-duty wire mat. Square posts attach firmly to shelves with a higher than normal shelf collar-- strength to spare! Fast, easy assembly-- plastic adapters slide down the posts, then securely snap into position with just a twist of the wrist. Shelf locations on the post are easy to identify.

	AMCO II HEAVY-DUTY WIRE SHELVING ACCESSORIES Add-On Clips (HCLIP-ZP) For use in corners or for continuous runs of shelving where two posts are eliminated. Use two clips for each shelf at each side where two posts are not used. Chromate finish. Fast, Sturdy Assembly. Plastic adapter easily slides down the post. Securely snaps into position with just a twist of the wrist. Square post design for extra strength.

	BOXER™ BOX SHELVING Boxer Shelving delivers more support for less cost than any other shelving in the industry. Features full welded box formation in front and back of shelf and shall have formed channels on both ends. Corners are fully lapped for extra strength. Available in 22 or 20 ga. shelves.

	BULK RACK DECKING WIRE DECKING - 50% open wire decking satisfies new NFPA 13 requirements. 2 x 4 x 4" gauge wire. Flat wire deck shelf surface, with waterfall front and rear. Notched corners to accommodate angle posts. Galvanized rust-resistant finish. PARTICLEBOARD DECKING - Strong 5/8" thick composition board is made of very small pieces of wood bonded together with resin.

	BULK RACK SHELVING Unobstructed shelf openings maximize storage capacity. Boltless bulk shelving is a low cost solution to your storage needs. Does the job of several conventional shelving sections at a fraction of the cost.

	Cardinal Selective Rack Systems Selective Rack Systems provide cost-effective solutions for high-capacity storage needs. Flexible adjustments on 3” increments for Keystone and 2” increments for Tear-Drop. Features integral safety clips so beams lock into place preventing uplifting and dislodging when load is retrieved. Rugged pallet racks assemble quickly and tightly with boltless beam connections. Premium powder coat finish is the industry’s most durable high gloss finish. Complies with RMI, AISI and AISC specifications.

	CHROME WIRE SHELVING CARTS Resists corrosion, prevents the build-up of dirt, dust, improves the visibility of stored parts and allows for sprinkler penetration and ventilation. Comes complete with 4 casters. Easy to assemble. Chrome attractive good looks for front-office use. Tough enough for industrial work. Supports heavy duty loads up to 800 lbs.

	CHROME WIRE SHELVING UNITS WITH BINS Combine stylish chrome shelving and parts organizing bins. Sturdy shelving unit supports loads up to 800 lbs. Choice of bins. Easy to assemble. Shelf Bins, Ultra Bins, Giant Hopper Bins, Magnum Bins, Donut Bumper, Mobile Kit.

	DUNNAGE-RACK™ BULK STORAGE RACKS Impervious to oils, salts, acids and most chemicals. Easy to steam clean or disinfect. Lightweight for ease in handling. No tools required, snaps together in seconds. Temporary or permanent. Choose the Solid Top Dunnage-Rack where a grid top is undesirable and higher weight capacity is needed.

	DURA-SHELF™ PLASTIC BULK SHELVING Made of heavy duty high impact plastic for long-wearing use. Impervious to oils, gas, acids, solvents and most chemicals. Open grid shelving is ideal for wet, corrosive and harsh environments. Reduces dirt and dust accumulation and increases air flow and light penetration. Add or subtract shelves to satisfy spacing needs.

	EZ FOLDING FILE STORAGE BOXES For transfering and storing letter and legal size files. Saves, time, folds together in less than 2 seconds - - bottom self-locks automatically. Two-piece design for easy access. Available from stock in 200 lb. test, "C" flute corrugated, Oyster White on one side. Sold and priced by the Set (Top & Bottom)

	HALLOWELL RIVETWELL™ SINGLE RIVET BOLTLESS SHELVING Shelves adjust on 1 1/2" centers. Features common T-posts between units. All components are engineered to attach snugly to one another without the use of loose fasteners. This unique design has rivets, which are factory attached to all left-to-right and front-to-back beams. The rivets align with keyhole slots in the vertical posts. Once tapped into place using a standard rubber mallet, the units are tightly assembled providing maximum strength. Easy, quick assembly -- no special tools. Attractive design.

	HEAVY DUTY 36" WIDE INDUSTRIAL SHELVING Rugged construction features stand up to abuse in high-activity areas. Shelf clips fit quickly into post to lock shelves firmly in place without tools. Meets varying capacity requirements by assembling mixed or matched sections of the same depth and height.

	HEAVY DUTY INDUSTRIAL SHELVING For extra-heavy loads, this shelving does the job. Thick 18 ga. construction affords superior supporting power. Perfect for heavy dies, castings, power tools, liquids, and more. Assembles easily and quickly. Handsome gray polyester finish.

	HEAVY-DUTY PLASTEEL® SHELVING Plasteel® Shelving Units use standard Amco posts and clips for versatile and easy assembly. Add-on units are also available to save money and go around corners. Shelves -- vented or solid -- are Gray with matching rust-resistant posts. Add-On Units consist of shelves, two posts and two Add-On Clips per shelf.

	HEAVY-DUTY SHELVING Shelves are reinforced with stiffeners welded to their underside -- reinforcements increase per shelf capacity to 3,000 lbs. Five shelf units have a total of 15,000 lbs. capacity based on evenly distributed loads. Posts are 12 ga., 2" x 2" galvanized steel -- adds strength, keeps units straight, sturdy and rigid. Easily assembled with provided fasteners.

	HEAVY-DUTY Z-BEAM STORAGE RACK Engineered for HAND loading and unloading or difficult, bulky items, small parts and tools. Heavy-duty 14 ga. all welded upright frames are punched on 1 ½” centers for maximum adjustability. Assemble securely in minutes -- no nuts or bolts needed.

	INDUSTRIAL BOLTLESS SHELVING Industrial Boltless Shelving provides strong supporting power with time-saving assembly. Steel shelves just drop into place - complete with 4 shelves per unit. Components snap together without any nuts, bolts or clips. Post and beams are 14 ga. with Gray polyester finish. Beams adjust on 1.5" centers. All units 72"H. so top shelf is accessible.

	INDUSTRIAL SHELVING Designed to be the most economical and dependable storage for your factory, warehouse or office stockrooms. Stands up to heavy loads and daily hard use. Ideal for packages, parts, supplies, tools or inventory. Handsome gray polyester finish. Shipped K.D.

	INDUSTRIAL SHELVING 48" WIDE Yields more shelf space for long, unwieldy items. Features a full 600 lb. capacity per shelf. Integrates with comparable depth 36" wide shelving.

	JARKE HIGH DENSITY E-Z GLIDE ROLL-OUT SHELVING Roll-out shelf provides vertical access to extra heavy dies, machine parts, castings and more. Super industrial strength -- handles 2000 lbs. per shelf capacity including solid steel top deck. Shelves adjust on 2" centers. Provides easy, efficient access to stored items. Features 100% full extension shelves.

	KLIP-IT™ INDUSTRIAL STEEL SHELVING - LIGHT DUTY Offset angle post support heavy loads and accommodate compression clips. Sturdy formed shelf is made from cold rolled steel and has "Triple Bends" on all four sides for incomparable strength. Features a rust resistant phosphatized cleaning for better paint adhesion and durability.

	KWIK SHELF Wire shelving for bulk storage rack and rivet shelving. Features 2" x 4" mesh pattern with extra reinforcing wires for added support and a high quality finish. An ideal replacement for particleboard. Improves storage area by providing greater visibility of inventory. Increases fire safety and cleanliness. Longer life span than wood. Eliminates the need to cut particle board to fit.

	OPEN AREA RACK DECK Features uniform strength across the entire surface unlike wire decks. Sized to fit the dimensions of particular shelves. Tek - fastened to shelves during installation to insure against accidental disengagement. For sprinkler and fire protection requirements.

	PARENT METAL PRODUCTS BULK RACKS Rugged, sturdy and safe storage. Beams adjust on 1 1/2" centers. All components are 14 ga. Beams easily snap into posts as shown. Post and beams are Gray polyester finish. All units priced with 4 levels. Other decking is also available from any lumberyard or home center.

	PICK RACK SYSTEMS Angled shelves keep small parts in the front of the bins for easy viewing and picking. Convenient high-density storage. Handsome Gray baked-enamel finish. Yellow polypropylene bins. Parts are organized and are ready for easy, instant selection. Rugged steel construction supports heavy loads.

	QUANTUM STORAGE CHROME WIRE SHELVING Heavy-duty chrome modular wire storage system offers a combination of shelf and post sizes to meet any applications. Split sleeve connectors with grooved numbered post allows for easy and quick assembly. Shelves are constructed of all welded wire mats and supported with architectural wire trusses providing 800 lb. capacity per shelf. Leveling legs support each corner on stationary units and polyurethane non-marking casters can be added to mobilize unit.

	RECORD ARCHIVE SHELVING Convenient, economical bulk storage for record retention. Single or double entry units allow complete access to all files for quick document retrieval. Units to 23' tall available with catwalks. Convenient, economical bulk storage for record retention. Single or double entry units allow complete access to all files for quick document retrieval. Units to 23' tall available with catwalks.

	RIVET RACK SHELVING Rivet rack is a safe and effective way to meet a broad range of storage requirements with one economical system. Rugged 14 ga. components require no special clips, fasteners or tools simply snap together to lock in place. Strong, sturdy steel units allow stored materials to be accessed from all four sides. Components are treated with a rust-inhibiting base coat, and Frost Gray enamel finish is baked on for longevity and durability. Particle board or wire decking optional.

	RIVET SHELVING Ideal for all types of package and supply storage. Uses common tee posts between units to provide economical add-ons. Provides clear access from all sides -- no braces to get in the way. Adjustable on 11/2" centers -- allows custom design units to fit various load sizes. Comes in a variety of beam sizes to accommodate a wide range of loads.

	RIVET-LOCK BULK STORAGE RACKS Sturdy roll-formed steel framing consisting of 14 ga. steel uprights, left to right beams and steel front to back beams providing maximum support. Shelves are adjustable on 1 ½” increments. All units are 3 level with an overall height of 7’. Additional shelf levels available for added storage.

	RIVET-RAK™ STEEL SHELVING Rugged and sturdy Rivet-Rak™ Steel Shelving is perfect for medium to heavy loads in the warehouse, plant or office. Features double rivet beam top and bottom and uses single rivet beams for maximum vertical space on intermediate levels. Shelves easily adjust on 1-1/2" centers.

	RIVETWELL™ DOUBLE RIVET BOLTLESS SHELVING Free, easy access from all sides. Double rivet angle beams provide additional unit rigidity and higher shelf capacity. All components are engineered to attach snugly to one another without the use of loose fasteners. Rivets are factory attached to all left-to-right and front-to-back beams. The rivets align with keyhole slots in the vertical posts and tapped into place. Easy assembly -- no special tools.